Skip to Content
Eveley Surf | Surfboard Fins, Surf hardware & Accessories
Fins
Center fins
Side fins
Twin and Keel fins
Thruster fins
Quad fins
Accessories
Finjak
Finjak video
Men's chest zip wetsuit
Men's back zip wetsuit
Surfing hat
Compatibility kit
Fin key
Spring loaded center fin retainer
4mm Screw and Plate
5mm Screw and Plate
Finger Tighten Screw and Plate
Wax comb with integrated fin key
Boards
Sale
0
0
0
0
Eveley Surf | Surfboard Fins, Surf hardware & Accessories
Fins
Center fins
Side fins
Twin and Keel fins
Thruster fins
Quad fins
Accessories
Finjak
Finjak video
Men's chest zip wetsuit
Men's back zip wetsuit
Surfing hat
Compatibility kit
Fin key
Spring loaded center fin retainer
4mm Screw and Plate
5mm Screw and Plate
Finger Tighten Screw and Plate
Wax comb with integrated fin key
Boards
Sale
Folder: Fins
Back
Center fins
Side fins
Twin and Keel fins
Thruster fins
Quad fins
Folder: Accessories
Back
Finjak
Finjak video
Men's chest zip wetsuit
Men's back zip wetsuit
Surfing hat
Compatibility kit
Fin key
Spring loaded center fin retainer
4mm Screw and Plate
5mm Screw and Plate
Finger Tighten Screw and Plate
Wax comb with integrated fin key
Boards
Sale
Shop 9'4" ST Noserider. For local pick up only.
15053.JPG Image 1 of 39
15053.JPG
gigi9.jpg Image 2 of 39
gigi9.jpg
11838.JPG Image 3 of 39
11838.JPG
11907.JPG Image 4 of 39
11907.JPG
11617.JPG Image 5 of 39
11617.JPG
11638.JPG Image 6 of 39
11638.JPG
11529.JPG Image 7 of 39
11529.JPG
11536.JPG Image 8 of 39
11536.JPG
11533.JPG Image 9 of 39
11533.JPG
11625.JPG Image 10 of 39
11625.JPG
11530.JPG Image 11 of 39
11530.JPG
11506.JPG Image 12 of 39
11506.JPG
gigi1.jpg Image 13 of 39
gigi1.jpg
010.JPG Image 14 of 39
010.JPG
7249a.JPG Image 15 of 39
7249a.JPG
7225a.JPG Image 16 of 39
7225a.JPG
6843a.JPG Image 17 of 39
6843a.JPG
6828a.JPG Image 18 of 39
6828a.JPG
6827a.JPG Image 19 of 39
6827a.JPG
6810a.JPG Image 20 of 39
6810a.JPG
6765a.JPG Image 21 of 39
6765a.JPG
6758a.JPG Image 22 of 39
6758a.JPG
6666a.JPG Image 23 of 39
6666a.JPG
6690a.JPG Image 24 of 39
6690a.JPG
6661a.JPG Image 25 of 39
6661a.JPG
6653a.JPG Image 26 of 39
6653a.JPG
6598a.JPG Image 27 of 39
6598a.JPG
6585a.JPG Image 28 of 39
6585a.JPG
6591a.JPG Image 29 of 39
6591a.JPG
6533a.JPG Image 30 of 39
6533a.JPG
6514a.JPG Image 31 of 39
6514a.JPG
6513a.JPG Image 32 of 39
6513a.JPG
6495a.JPG Image 33 of 39
6495a.JPG
6361a.JPG Image 34 of 39
6361a.JPG
6382a.JPG Image 35 of 39
6382a.JPG
6362a.JPG Image 36 of 39
6362a.JPG
6377a.JPG Image 37 of 39
6377a.JPG
6372a.JPG Image 38 of 39
6372a.JPG
6347a.JPG Image 39 of 39
6347a.JPG
15053.JPG
gigi9.jpg
11838.JPG
11907.JPG
11617.JPG
11638.JPG
11529.JPG
11536.JPG
11533.JPG
11625.JPG
11530.JPG
11506.JPG
gigi1.jpg
010.JPG
7249a.JPG
7225a.JPG
6843a.JPG
6828a.JPG
6827a.JPG
6810a.JPG
6765a.JPG
6758a.JPG
6666a.JPG
6690a.JPG
6661a.JPG
6653a.JPG
6598a.JPG
6585a.JPG
6591a.JPG
6533a.JPG
6514a.JPG
6513a.JPG
6495a.JPG
6361a.JPG
6382a.JPG
6362a.JPG
6377a.JPG
6372a.JPG
6347a.JPG

9'4" ST Noserider. For local pick up only.

$1,600.00
Only 1 left in stock

9’4” x 23” x 3 “

A well-balanced board suitable for a wide range of conditions.

We provided a mild concave under the nose for lift, a gentle slight roll in the center of the bottom for easy rail to rail maneuvers, and then flat at the fin for immense control.

The wide point is centered to allow for variable conditions and rider capabilities.

Nose width is 18.2” for extended nose riding and the tail width is 16.2” for sensational hold and stability.

50/50 rails at the nose lead to a soft 60/40 in the center graduating to a gentle pinch at the tail.

As with all our noserider boards there is adequate nose rocker with slightly more tail rocker for hold and control.

This one has a 10mm stringer for strength and cut lap resin tint. It comes with a single sliding fin box and a standard leash plug.

All our boards are meticulously built by highly experienced and skilled craftsmen, ensuring the highest quality standards.

Text Graeme on 0418262393 for more details.

Buy

9’4” x 23” x 3 “

A well-balanced board suitable for a wide range of conditions.

We provided a mild concave under the nose for lift, a gentle slight roll in the center of the bottom for easy rail to rail maneuvers, and then flat at the fin for immense control.

The wide point is centered to allow for variable conditions and rider capabilities.

Nose width is 18.2” for extended nose riding and the tail width is 16.2” for sensational hold and stability.

50/50 rails at the nose lead to a soft 60/40 in the center graduating to a gentle pinch at the tail.

As with all our noserider boards there is adequate nose rocker with slightly more tail rocker for hold and control.

This one has a 10mm stringer for strength and cut lap resin tint. It comes with a single sliding fin box and a standard leash plug.

All our boards are meticulously built by highly experienced and skilled craftsmen, ensuring the highest quality standards.

Text Graeme on 0418262393 for more details.

9’4” x 23” x 3 “

A well-balanced board suitable for a wide range of conditions.

We provided a mild concave under the nose for lift, a gentle slight roll in the center of the bottom for easy rail to rail maneuvers, and then flat at the fin for immense control.

The wide point is centered to allow for variable conditions and rider capabilities.

Nose width is 18.2” for extended nose riding and the tail width is 16.2” for sensational hold and stability.

50/50 rails at the nose lead to a soft 60/40 in the center graduating to a gentle pinch at the tail.

As with all our noserider boards there is adequate nose rocker with slightly more tail rocker for hold and control.

This one has a 10mm stringer for strength and cut lap resin tint. It comes with a single sliding fin box and a standard leash plug.

All our boards are meticulously built by highly experienced and skilled craftsmen, ensuring the highest quality standards.

Text Graeme on 0418262393 for more details.

Available for local pick up in Balgowlah, NSW only. We are happy to work in with board couriers.

or maybe these?

Custom 7' Murphy. smaller00000514.JPG Pete.jpeg
Custom 7' Murphy.
$1,266.00
Used 9'2" SC Utility. For local pick up only. 3326.JPG
Used 9'2" SC Utility. For local pick up only.
$1,150.00
Custom EPS/Epoxy Longboard to 9'6".
Custom EPS/Epoxy Longboard to 9'6".
$1,600.00
Custom 9'5" PT Noserider. 1638 (2).JPG
Custom 9'5" PT Noserider.
$1,600.00
Custom SC Noserider to 9'6" rach4.PNG 0630.JPG 10785.JPG 9172 (3).JPG 10691.JPG 9414 (2).JPG 9265 (3).JPG 9304.JPG 9581 (2).JPG 10742.JPG 9102 (2).JPG 0220 (2).JPG 10761.JPG 0672.JPG 10723.JPG 10751.JPG
Custom SC Noserider to 9'6"
$1,600.00

Contact us

Fin terminology

Home

Gallery

Shipping and Returns