Used 9'2" SC Utility. For local pick up only.
A powerful and responsive Utility Longboard made using a traditional PU blank and polyester resin for an original feel. This one 9’ 2” x 23” x 3” (71 litres)
This board features a spoon concave under the nose for sensational lift while noseriding .The rails are very low at the rear, staying low for speed in the centre, then graduating to 50/50 at the nose for hold. This 1970’s downrail design, combined with a flat bottom in the rear two thirds of the board, produces power and drive out of bottom turns and cutbacks.
The rocker has sufficient nose lift for steeper takeoffs, while the restrained tail rocker further enhances drive and speed.
It is glassed with 2 x 6oz deck and 1 x 6oz on the bottom and features a respectful yellow colour bottom and rails spray and 9mm cedar stringer. It has a single 10.5” sliding fin box as the board is designed to emulate single fin surfing from the 1970’s reinvented for the current longboard era, and a deck mount leash plug.
This is a great Utility longboard which performs well in all conditions without sacrificing noseriding and drive when required.
Designed and shaped by Graeme Gillmer (Balgowlah) from a Surfblanks (Brookvale) blue grade blank and glassed at Rhino Laminating (Brookvale).
A powerful and responsive Utility Longboard made using a traditional PU blank and polyester resin for an original feel. This one 9’ 2” x 23” x 3” (71 litres)
This board features a spoon concave under the nose for sensational lift while noseriding .The rails are very low at the rear, staying low for speed in the centre, then graduating to 50/50 at the nose for hold. This 1970’s downrail design, combined with a flat bottom in the rear two thirds of the board, produces power and drive out of bottom turns and cutbacks.
The rocker has sufficient nose lift for steeper takeoffs, while the restrained tail rocker further enhances drive and speed.
It is glassed with 2 x 6oz deck and 1 x 6oz on the bottom and features a respectful yellow colour bottom and rails spray and 9mm cedar stringer. It has a single 10.5” sliding fin box as the board is designed to emulate single fin surfing from the 1970’s reinvented for the current longboard era, and a deck mount leash plug.
This is a great Utility longboard which performs well in all conditions without sacrificing noseriding and drive when required.
Designed and shaped by Graeme Gillmer (Balgowlah) from a Surfblanks (Brookvale) blue grade blank and glassed at Rhino Laminating (Brookvale).
A powerful and responsive Utility Longboard made using a traditional PU blank and polyester resin for an original feel. This one 9’ 2” x 23” x 3” (71 litres)
This board features a spoon concave under the nose for sensational lift while noseriding .The rails are very low at the rear, staying low for speed in the centre, then graduating to 50/50 at the nose for hold. This 1970’s downrail design, combined with a flat bottom in the rear two thirds of the board, produces power and drive out of bottom turns and cutbacks.
The rocker has sufficient nose lift for steeper takeoffs, while the restrained tail rocker further enhances drive and speed.
It is glassed with 2 x 6oz deck and 1 x 6oz on the bottom and features a respectful yellow colour bottom and rails spray and 9mm cedar stringer. It has a single 10.5” sliding fin box as the board is designed to emulate single fin surfing from the 1970’s reinvented for the current longboard era, and a deck mount leash plug.
This is a great Utility longboard which performs well in all conditions without sacrificing noseriding and drive when required.
Designed and shaped by Graeme Gillmer (Balgowlah) from a Surfblanks (Brookvale) blue grade blank and glassed at Rhino Laminating (Brookvale).
No mass-produced boards here. Every one is a unique masterpiece. The boards can be viewed in Balgowlah by appointment. Text 0418262393
